Inexpensive Hair Straighteners Vs. Expensive Flat Irons

When you’re trying to decide what kind of flat iron to buy, it’s pretty easy to get wrapped up in the idea of a $20 iron that swears you will get the look you want. Sometimes, you get lucky and find a really good tool for your hair that is inexpensive. Mostly however, you’ll find the quality on a cheap option is way below that of a higher priced one, and you might regret not springing for the better model.

Style Staying Power

If you don’t get enough consistent heat on your hair during the few straightening passes you take, your hair won’t stay straight during the day. It may look straighter than it did, but the frizz will return in some form. A lot of less expensive straighteners don’t heat up enough to get the right amount on your strands, or they don’t have consistent heat all over the plate. Lack of heat consistency leads to hot spots which means you will you’ll end up with a half frizzy, half perfect mane that just looks like a hot mess.

The Plates Matter

Protective coating won’t last as long on cheaper plates

When you’re shopping for irons, you’ll see a lot of different claims about the type of material used in the plates, but inexpensive irons almost never have plates that will last for a long time. They are often made out of metal or glass (neither of which conduct heat well), which means a whole lot of “non-straight” hair!

Heat Hot Heat

Make sure you know what you’re getting before investing any money in an inexpensive iron. Professional flat irons are made so you can use the minimum amount of heat on your hair and get a well-distributed result. Inexpensive hair straighteners may require you to pump the heat level all the way up to get enough control of your hair, and that increases the likelihood of damaging your locks.

Floating On Air

One of the things a lot of people don’t realize about hair straighteners is the more effective ones have plates that are not totally affixed to the housing. When you don’t know how it works, it sounds like a bad idea to have really hot things that aren’t secured, but I can assure you they are. Floating doesn’t mean the plates come off. It means they move just enough to be able to flex. The freedom allows the two sides to adjust based on the angle to get as close to each other as possible. The closer the plates get, the more you will be able clamp the hair correctly.

Inexpensive straighteners either have fixed or a single floating plate which means there are areas of the plates that won’t touch because they can’t get close to each other. If they can’t get close enough, they can’t straighten and you’ll find yourself unable to get the right amount of heat on your hair. What should be a 10 or 20 minute job becomes an attempt to straighten your entire head with a 1-inch by 1-inch square of heat, and that will take an eternity.

All of our straighteners feature floating plates, rapid and even heat-up as well as the most advanced technology available. Check them out at https://straightaheadbeauty.com/shop/flat-irons/ or at retailers nationwide.

 

Reference: hairstraighteningstudio.com

Share:

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.